CentOS 源使用帮助

地址

https://mirrors.shuosc.cn/centos/

说明

CentOS软件源

收录架构

i386
x86_64

收录版本

使用说明

首先备份 CentOS-Base.repo

mv /etc/yum.repos.d/CentOS-Base.repo /etc/yum.repos.d/CentOS-Base.repo.backup

下载对应版本的CentOS-Base.repo, 放入/etc/yum.repos.d/

这是CentOS 5的:

# CentOS-Base.repo
#
# The mirror system uses the connecting IP address of the client and the
# update status of each mirror to pick mirrors that are updated to and
# geographically close to the client.  You should use this for CentOS updates
# unless you are manually picking other mirrors.
#
# If the mirrorlist= does not work for you, as a fall back you can try the 
# remarked out baseurl= line instead.
#
#

[base]
name=CentOS-$releasever - Base - mirrors.shuosc.cn
baseurl=https://mirrors.shuosc.cn/centos/$releasever/os/$basearch/
#mirrorlist=http://mirrorlist.centos.org/?release=$releasever&arch=$basearch&repo=os
gpgcheck=1
gpgkey=https://mirrors.shuosc.cn/centos/RPM-GPG-KEY-CentOS-5

#released updates 
[updates]
name=CentOS-$releasever - Updates - mirrors.shuosc.cn
baseurl=https://mirrors.shuosc.cn/centos/$releasever/updates/$basearch/
#mirrorlist=https://mirrorlist.centos.org/?release=$releasever&arch=$basearch&repo=updates
gpgcheck=1
gpgkey=https://mirrors.shuosc.cn/centos/RPM-GPG-KEY-CentOS-5

#additional packages that may be useful
[extras]
name=CentOS-$releasever - Extras - mirrors.shuosc.cn
baseurl=https://mirrors.shuosc.cn/centos/$releasever/extras/$basearch/
#mirrorlist=http://mirrorlist.centos.org/?release=$releasever&arch=$basearch&repo=extras
gpgcheck=1
gpgkey=https://mirrors.shuosc.cn/centos/RPM-GPG-KEY-CentOS-5

#packages used/produced in the build but not released
[addons]
name=CentOS-$releasever - Addons - mirrors.shuosc.cn
baseurl=https://mirrors.shuosc.cn/centos/$releasever/addons/$basearch/
#mirrorlist=http://mirrorlist.centos.org/?release=$releasever&arch=$basearch&repo=addons
gpgcheck=1
gpgkey=https://mirrors.shuosc.cn/centos/RPM-GPG-KEY-CentOS-5

#additional packages that extend functionality of existing packages
[centosplus]
name=CentOS-$releasever - Plus - mirrors.shuosc.cn
baseurl=https://mirrors.shuosc.cn/centos/$releasever/centosplus/$basearch/
#mirrorlist=https://mirrorlist.centos.org/?release=$releasever&arch=$basearch&repo=centosplus
gpgcheck=1
enabled=0
gpgkey=https://mirrors.shuosc.cn/centos/RPM-GPG-KEY-CentOS-5

#contrib - packages by Centos Users
[contrib]
name=CentOS-$releasever - Contrib - mirrors.shuosc.cn
baseurl=https://mirrors.shuosc.cn/centos/$releasever/contrib/$basearch/
#mirrorlist=http://mirrorlist.centos.org/?release=$releasever&arch=$basearch&repo=contrib
gpgcheck=1
enabled=0
gpgkey=https://mirrors.shuosc.cn/centos/RPM-GPG-KEY-CentOS-5

这是CentOS 6的:

# CentOS-Base.repo
#
# The mirror system uses the connecting IP address of the client and the
# update status of each mirror to pick mirrors that are updated to and
# geographically close to the client.  You should use this for CentOS updates
# unless you are manually picking other mirrors.
#
# If the mirrorlist= does not work for you, as a fall back you can try the 
# remarked out baseurl= line instead.
#
#

[base]
name=CentOS-$releasever - Base - mirrors.shuosc.cn
baseurl=https://mirrors.shuosc.cn/centos/$releasever/os/$basearch/
#mirrorlist=http://mirrorlist.centos.org/?release=$releasever&arch=$basearch&repo=os
gpgcheck=1
gpgkey=https://mirrors.shuosc.cn/centos/RPM-GPG-KEY-CentOS-6

#released updates 
[updates]
name=CentOS-$releasever - Updates - mirrors.shuosc.cn
baseurl=https://mirrors.shuosc.cn/centos/$releasever/updates/$basearch/
#mirrorlist=http://mirrorlist.centos.org/?release=$releasever&arch=$basearch&repo=updates
gpgcheck=1
gpgkey=https://mirrors.shuosc.cn/centos/RPM-GPG-KEY-CentOS-6

#additional packages that may be useful
[extras]
name=CentOS-$releasever - Extras - mirrors.shuosc.cn
baseurl=https://mirrors.shuosc.cn/centos/$releasever/extras/$basearch/
#mirrorlist=http://mirrorlist.centos.org/?release=$releasever&arch=$basearch&repo=extras
gpgcheck=1
gpgkey=https://mirrors.shuosc.cn/centos/RPM-GPG-KEY-CentOS-6

#additional packages that extend functionality of existing packages
[centosplus]
name=CentOS-$releasever - Plus - mirrors.shuosc.cn
baseurl=https://mirrors.shuosc.cn/centos/$releasever/centosplus/$basearch/
#mirrorlist=http://mirrorlist.centos.org/?release=$releasever&arch=$basearch&repo=centosplus
gpgcheck=1
enabled=0
gpgkey=https://mirrors.shuosc.cn/centos/RPM-GPG-KEY-CentOS-6

#contrib - packages by Centos Users
[contrib]
name=CentOS-$releasever - Contrib - mirrors.shuosc.cn
baseurl=https://mirrors.shuosc.cn/centos/$releasever/contrib/$basearch/
#mirrorlist=http://mirrorlist.centos.org/?release=$releasever&arch=$basearch&repo=contrib
gpgcheck=1
enabled=0
gpgkey=https://mirrors.shuosc.cn/centos/RPM-GPG-KEY-CentOS-6

这是CentOS 7的:

<file repo CentOS-Base.repo>
# CentOS-Base.repo
#
# The mirror system uses the connecting IP address of the client and the
# update status of each mirror to pick mirrors that are updated to and
# geographically close to the client.  You should use this for CentOS updates
# unless you are manually picking other mirrors.
#
# If the mirrorlist= does not work for you, as a fall back you can try the
# remarked out baseurl= line instead.
#
#

[base]
name=CentOS-$releasever - Base
#mirrorlist=http://mirrorlist.centos.org/?release=$releasever&arch=$basearch&repo=os
baseurl=https://mirrors.shuosc.cn/centos/$releasever/os/$basearch/
gpgcheck=1
gpgkey=https://mirrors.shuosc.cn/centos/RPM-GPG-KEY-CentOS-7

#released updates
[updates]
name=CentOS-$releasever - Updates
# mirrorlist=http://mirrorlist.centos.org/?release=$releasever&arch=$basearch&repo=updates
baseurl=https://mirrors.shuosc.cn/centos/$releasever/updates/$basearch/
gpgcheck=1
gpgkey=https://mirrors.shuosc.cn/centos/RPM-GPG-KEY-CentOS-7

#additional packages that may be useful
[extras]
name=CentOS-$releasever - Extras
# mirrorlist=http://mirrorlist.centos.org/?release=$releasever&arch=$basearch&repo=extras
baseurl=https://mirrors.shuosc.cn/centos/$releasever/extras/$basearch/
gpgcheck=1
gpgkey=https://mirrors.shuosc.cn/centos/RPM-GPG-KEY-CentOS-7

#additional packages that extend functionality of existing packages
[centosplus]
name=CentOS-$releasever - Plus
# mirrorlist=http://mirrorlist.centos.org/?release=$releasever&arch=$basearch&repo=centosplus
baseurl=https://mirrors.shuosc.cn/centos/$releasever/centosplus/$basearch/
gpgcheck=1
enabled=0
gpgkey=https://mirrors.shuosc.cn/centos/RPM-GPG-KEY-CentOS-7

运行yum makecache生成缓存。

相关链接

官方主页: http://www.centos.org/
邮件列表: http://www.centos.org/modules/tinycontent/index.php?id=16
论坛: http://www.centos.org/modules/newbb/
文档: http://www.centos.org/docs/
Wiki: http://wiki.centos.org/
镜像列表: http://www.centos.org/modules/tinycontent/index.php?id=32

PreviousArch Linux CN 源使用帮助 NextCocoaPods 源使用帮助

Last updated 4 years ago

Was this helpful?

# CentOS-Base.repo # # The mirror system uses the connecting IP address of the client and the # update status of each mirror to pick mirrors that are updated to and # geographically close to the client. You should use this for CentOS updates # unless you are manually picking other mirrors. # # If the mirrorlist= does not work for you, as a fall back you can try the # remarked out baseurl= line instead. # # [base] name=CentOS-$releasever - Base - mirrors.shuosc.cn baseurl=https://mirrors.shuosc.cn/centos/$releasever/os/$basearch/ #mirrorlist=http://mirrorlist.centos.org/?release=$releasever&arch=$basearch&repo=os gpgcheck=1 gpgkey=https://mirrors.shuosc.cn/centos/RPM-GPG-KEY-CentOS-5 #released updates [updates] name=CentOS-$releasever - Updates - mirrors.shuosc.cn baseurl=https://mirrors.shuosc.cn/centos/$releasever/updates/$basearch/ #mirrorlist=https://mirrorlist.centos.org/?release=$releasever&arch=$basearch&repo=updates gpgcheck=1 gpgkey=https://mirrors.shuosc.cn/centos/RPM-GPG-KEY-CentOS-5 #additional packages that may be useful [extras] name=CentOS-$releasever - Extras - mirrors.shuosc.cn baseurl=https://mirrors.shuosc.cn/centos/$releasever/extras/$basearch/ #mirrorlist=http://mirrorlist.centos.org/?release=$releasever&arch=$basearch&repo=extras gpgcheck=1 gpgkey=https://mirrors.shuosc.cn/centos/RPM-GPG-KEY-CentOS-5 #packages used/produced in the build but not released [addons] name=CentOS-$releasever - Addons - mirrors.shuosc.cn baseurl=https://mirrors.shuosc.cn/centos/$releasever/addons/$basearch/ #mirrorlist=http://mirrorlist.centos.org/?release=$releasever&arch=$basearch&repo=addons gpgcheck=1 gpgkey=https://mirrors.shuosc.cn/centos/RPM-GPG-KEY-CentOS-5 #additional packages that extend functionality of existing packages [centosplus] name=CentOS-$releasever - Plus - mirrors.shuosc.cn baseurl=https://mirrors.shuosc.cn/centos/$releasever/centosplus/$basearch/ #mirrorlist=https://mirrorlist.centos.org/?release=$releasever&arch=$basearch&repo=centosplus gpgcheck=1 enabled=0 gpgkey=https://mirrors.shuosc.cn/centos/RPM-GPG-KEY-CentOS-5 #contrib - packages by Centos Users [contrib] name=CentOS-$releasever - Contrib - mirrors.shuosc.cn baseurl=https://mirrors.shuosc.cn/centos/$releasever/contrib/$basearch/ #mirrorlist=http://mirrorlist.centos.org/?release=$releasever&arch=$basearch&repo=contrib gpgcheck=1 enabled=0 gpgkey=https://mirrors.shuosc.cn/centos/RPM-GPG-KEY-CentOS-5

# CentOS-Base.repo # # The mirror system uses the connecting IP address of the client and the # update status of each mirror to pick mirrors that are updated to and # geographically close to the client. You should use this for CentOS updates # unless you are manually picking other mirrors. # # If the mirrorlist= does not work for you, as a fall back you can try the # remarked out baseurl= line instead. # # [base] name=CentOS-$releasever - Base - mirrors.shuosc.cn baseurl=https://mirrors.shuosc.cn/centos/$releasever/os/$basearch/ #mirrorlist=http://mirrorlist.centos.org/?release=$releasever&arch=$basearch&repo=os gpgcheck=1 gpgkey=https://mirrors.shuosc.cn/centos/RPM-GPG-KEY-CentOS-6 #released updates [updates] name=CentOS-$releasever - Updates - mirrors.shuosc.cn baseurl=https://mirrors.shuosc.cn/centos/$releasever/updates/$basearch/ #mirrorlist=http://mirrorlist.centos.org/?release=$releasever&arch=$basearch&repo=updates gpgcheck=1 gpgkey=https://mirrors.shuosc.cn/centos/RPM-GPG-KEY-CentOS-6 #additional packages that may be useful [extras] name=CentOS-$releasever - Extras - mirrors.shuosc.cn baseurl=https://mirrors.shuosc.cn/centos/$releasever/extras/$basearch/ #mirrorlist=http://mirrorlist.centos.org/?release=$releasever&arch=$basearch&repo=extras gpgcheck=1 gpgkey=https://mirrors.shuosc.cn/centos/RPM-GPG-KEY-CentOS-6 #additional packages that extend functionality of existing packages [centosplus] name=CentOS-$releasever - Plus - mirrors.shuosc.cn baseurl=https://mirrors.shuosc.cn/centos/$releasever/centosplus/$basearch/ #mirrorlist=http://mirrorlist.centos.org/?release=$releasever&arch=$basearch&repo=centosplus gpgcheck=1 enabled=0 gpgkey=https://mirrors.shuosc.cn/centos/RPM-GPG-KEY-CentOS-6 #contrib - packages by Centos Users [contrib] name=CentOS-$releasever - Contrib - mirrors.shuosc.cn baseurl=https://mirrors.shuosc.cn/centos/$releasever/contrib/$basearch/ #mirrorlist=http://mirrorlist.centos.org/?release=$releasever&arch=$basearch&repo=contrib gpgcheck=1 enabled=0 gpgkey=https://mirrors.shuosc.cn/centos/RPM-GPG-KEY-CentOS-6